Click That Brick! Lumibricks Explorer Treehouse

Products Reviews Toys

While Lumibricks has been releasing a lot of sets for their Cyberpunk Neoncity line recently, that doesn’t mean that they’re slacking on other types of building sets. Case in point: one of their releases for November is the Explorer Treehouse, a companion piece to their Misty Forest Cabin.

The Explorer Treehouse box. Image by Paul Benson.

What Is the Lumibricks Explorer Treehouse?

The Explorer Treehouse is a 2,466-piece brick building set that comes with 3 Minifigures, 26 screen-printed pieces, and 14 LED lights. It retails for $124.99, and can be purchased through the Lumibricks website or from the Lumibricks store on Amazon.

Contents of the Explorer Treehouse set. Image by Paul Benson.

The set contains 11 brick bags, as well as 2 instruction manuals and assorted bags of special pieces. There’s also a lighting kit, with a power brick that uses 3 AA batteries, screwdriver, tweezers, and 2 bags of lighting elements.

The instruction manual includes a page at the front describing the different elements of the treehouse.

Your guide to the treehouse. Image by Paul Benson.

The Lumibricks Explorer Treehouse – Minifigures

The set only comes with 3 Minifigures. One of them is a Caucasian male Explorer, while the other two are Matis tribespeople, the indigenous people of Brazil. Personally, I feel that the Matis Minifigures have overly exaggerated appearances, and with the Robinson Crusoe-style Explorer, they can’t help but smack of colonialism. Perhaps I’m being too sensitive, but I think that Lumibricks would have been better served having just a castaway family for their Minifigures in this set. 

The Explorer and the 2 Matis tribesmen. Image by Paul Benson.

Assembling the Lumibricks Explorer Treehouse

Even though the set is far from Lumibricks’ largest, they still estimate that completing the Explorer Treehouse will take approximately 26 hours. This is not an exaggeration. Depending on who you are, the Explorer Treehouse will either be an extremely challenging build, or an extremely frustrating one. Or both. There are actually two points in the instruction manuals where Lumibricks cautions you to slow down and be careful.

Take a look at a slideshow of the build:

This slideshow requires JavaScript.

Here is the completed Explorer Treehouse:

The finished Explorer Treehouse. Image by Paul Benson.

Here’s a closer look at some of the completed set:

This slideshow requires JavaScript.

By the time I was done, I did end up with a very attractive model. However, I ended up with two wiring issues. First, there is a searchlight on the platform, one of the featured lights of the set. During the course of running the wires while attaching the tree trunk to the base (one of the cautioned parts of the instructions), I ended up with a wire that was too short to attach the lighting element to the spotlight. I instead opted to place it on the bottom of the platform, which is as far as it would reach.

The spotlight in question is on the far left of the platform. Image by Paul Benson.

There is a secondary lighting connector, which you can see in the picture above on the right side of the tree trunk. While all the lighting elements worked fine when I tested them before the build, possibly a wire got damaged along the way during the build. None of the upper tree lights or the hanging lantern worked once everything was assembled. To attempt to fix the lighting would entail a massive amount of breaking down the model and rebuilding, as well as possibly replacing a damaged wire.

Speaking of lighting, here’s what the Explorer Treehouse looks like, lit up (though obviously not with the full array of lighting). 

The Explore Treehouse, lit for night. Image by Paul Benson.

Some of the lights, like the cooking fire, flicker or pulse. There is also a hidden switch near the power supply which allows you to choose between a few different lighting setups, though without all of the lights active, I wasn’t really able to take advantage of this feature.

Finally, there is one other lighting issue that I had, but it didn’t have to do with the wiring. There is a projector that you build into the tree, which is supposed to project stars on your wall or ceiling. I was excited by this feature before receiving the set, but even though the projector lit up, I was never able to achieve the effect.

How the starlight projector is supposed to work. Image by Lumibricks.

Lumibricks Explorer Treehouse – Final Thoughts

So here’s the thing: I’m not going to say that you’ll have the same issues with lights and wires that I had. For myself, putting in all of that time carefully building the Explorer Treehouse, only to not have some of the features work as intended, was deeply frustrating. You may purchase and build the set, and your assembly will proceed flawlessly. But nevertheless, this is going to be a challenging build. It’s not one you can knock out in the afternoon, and will require a lot of attention to detail, and possibly a little bit of hair-pulling.

Even with the lighting issues I ran into, it’s still a lovely-looking set. I find the Minifigures are a bit questionable, but you can also choose not to display them with the set and not miss out on much. If you’re looking for a building set that will stretch your skills, and are prepared for some potential issues, then you should consider the Explorer Treehouse.

For more information or to make a purchase, head to the Lumibricks website.

Lumibricks sent a set for evaluation, but had no input into this review. I may earn a small commission on a qualified purchase.

Liked it? Take a second to support Paul Benson on Patreon!
Become a patron at Patreon!

Paul is a comic book writer, screenwriter, an avid board and tabletop gamer, reader of comics and collector of statues and figures. He is the creator of the webcomic "Heroines for Hire" and co-writer of "Disaster!: The Movie." He currently writes "E.I.: Earth Invasion" for Wunderman Comics.